Calibrate an accelerometer, gyroscope or magnetometer from a logged CSV and measure its
noise with Allan deviation. Your file is read in this browser and is never uploaded.
|a| - 1 g per static sample, before and after (mg); after calibration the sensor noise
sets the width
Poses
Gyroscope (deg/s); static segments shaded, rotations used for scale marked
Parameters
Bias against temperature: bin means and the fitted lines
Projections of the samples: raw (grey, around the hard-iron offset) and corrected
(colour, a circle of the field strength)
3D view: drag to rotate
Parameters
|m| minus its mean, before and after
Overlapping Allan deviation with 1-sigma error bars; dashed: fitted -1/2 and +1/2 slope
lines and the bias-instability floor
Noise terms
Error bars and +/- figures: 1/sqrt(2 (N/m - 1)) for a single point with N/m clusters.
Points with fewer than about three independent clusters are drawn but not used for the
read-offs.